iDatalink HRN-HRR-MA1 Plug and Play T-Harness for MA1 Vehicles with HU Connectors

We are a iDatalink authorized dealer so you get up-to-date, fully warrantied products. Shipping is free to the lower 48 states on everything you order!

What’s Inside?

< li >Vehicle/interface installation harness

< li >Front speaker preout harness

< li >Rear speaker preout harness

< li >Backup camera harness

< li >OBDI connector harness

< li > User’s Manual

Simplifies the Installation

iDatalink’s iDatalink HRN-HRR-MA1 installation harness simplifies the installation of the Maestro ADS-MRR or ADS-MRR2 Car Radio Replacement Interface module (sold separately) in select Mazda vehicles when replacing your factory radio. The package includes a harness that plugs in between the Maestro module, your factory radio’s wiring plugs, and the serial port on your new car stereo.

in-line Head-unit Connector Harness

This harness features an in-line head-unit connector harness, which will plug into their new “Head-unit direct” harnesses for select radio brands. If you’re installing a radio that doesn’t work with a “Head-unit direct” harness, simply cut off the plug and connect the wires to the harness included with your new radio.

Retains Your Vehicle’s Steering Wheel Audio Controls

The HRN-HRR-MA1 harness and interface module retains your vehicle’s steering wheel audio controls, factory amplifier, and backup camera with any aftermarket receiver with a composite video camera input. The harness also supplies the outputs (parking brake, reverse, and VSS [Vehicle Speed Sense]) necessary for installation of a navigation receiver, plus illumination and accessory power outputs.